Safety Glass bending tempering furnace YD-FBH-2415

Glass bending machine: Clear and float glass Beckhoff controller Advanced heating and cooling Cross bending

 Glass bending machine

Advantage:

High product quality

Opposite roll pressing, mechanical position location and accurate forming which is smooth without press mark.

Easy operation

Glass curvation is automaticlly controlled by computer without any mould.

Low Engergy consumption

The energy consumption of this machine is very low with good thermal insulation and reasonable energy saving.

 Technical data:

Technical date YD-FBH-2415
Parameters (for flat glass)	Max.Glass size	2400x3600mm (5-19mm), 2400x1800mm (4mm)
	Min.Glass size	100x280mm
	Glass thickness	4-19mm
	Output (5mm glass)	15 lots/hour
Parameters (for bent glass)	Max.Glass size	2400x1500mm (4-19mm)
	Min.Glass size	400x400mm
	Glass thickness	4-19mm
	Min.radius	650mm
	Output (5mm glass)	15 lots/hour
Power	Heating	680KW
	Fan	90KW+37KW
	Others	12KW
	Total	819KW
Other parameter	Machine dimension	20x2.8x2.8m (not including fan, air collection room)
	finished products rate	95%
	energy consumption	≤4KW/hour/square meter
	Quality standard	GB 15763.2—2005

Machine main components

The tempering furnace is consisted by loading table, heating furnace, tempering cooling device ,unloading table, wind motor, wind blowing system ,electric control cabinet and computer control terminals. For bending and tempering furnace, an additional bending and cooling cabinet is assembled for glass bending.

 

 

Machine in Australia, with Liaoda Glass edging, drilling, washing machines